
87
Bogart SE 4 User manual
TURNING OFF
Problem: The machine won‘t turn all the way off, the red light
remains lit.
Solution: The machine is in stand-by mode meaning that the
red light is always on. This mode of operation saves electricity
if you use the machine often. If you don‘t plan on using your
system for an extended period of time, then you should pull
the power plug (after having turned off the machine).
Problem: Is data lost if I pull the power plug for an extended
period of time?
Solution: No, your data is stored on the internal hard drive.
However, before pulling the plug you should power-down
the machine correctly by pressing the power switch on the
front of the machine or by clicking on the “OFF“ button in the
Main Menu screen. This also applies to all other cables. Never
disconnect a cable from your system while the machine is
operating.
Problem: The machine does not turn off right away. It takes a
while.
Solution: This is normal behavior for your system. Before the
machine is actually turned off the current project is automati-
cally saved. This can take several seconds. The machine will
only turn itself off when the project has been saved success-
fully. However, if the shutdown program receives no message
from the machine, it will turn the machine off, but only after
several seconds.
Problem: I have a problem, not contained in this list.
Solution: If you have access to the Internet, check out the fol-
lowing web site: http://www.macrosystem.de. Here (“Support“,
“FAQ“) you will find an updated list of FAQs (Frequently Asked
Questions) that may help you. You can also call your dealer, or
call our hotline if you have technical questions.
Komentáře k této Příručce